How To Install Schlage Smart Lock

5 Simple Steps To Installing A Schlage Smart Lock

Installing a Schlage smart lock is a simple process. However, there are some things you need to know before you get started.

1) Find the right door for installation.

2) Install the lock and ensure it is in place and working properly.

3) Install the app and create an account, if needed.

4) Connect with your home WiFi network, if needed.

5) Download the app on your phone or tablet and follow instructions to finish the installation process

Step 1: Preparing the Door for Installation

In this step, we’ll cover the very first part of the installation process for a new doorknob. This includes removing the old doorknob and preparing the area for installation.

For this, you’ll need to take off the trim that covers the screw holes on your door frame. You can do this by using a trim removal tool or wood chisel.

Step 2: Install the app and create an account, if needed.

Schlage is a company that manufactures locks, door hardware, and electronic security systems. They have recently developed a mobile app that helps users register their products with the company.

The app is available on both iOS and Android platforms.

Step 3: Insert the Bolt Into the Hole of the Door Knob or Deadbolt

Insert the bolt through the hole of the doorknob or deadbolt. Slide the bolt in and out of the hole until it fits snugly inside the hole.

To start, you need to find the bolt holes, either on the doorknob or deadbolt. Once you have found them, but the bolt through one hole. Push it in and out of the hole until it fits tightly inside it. Next, push the other end of the bolt through another hole and pull tight to make

Step 4: Prepare Your New Schlage Smart Lock For Installation

The last step in the installation process is to prepare your new Schlage Smart Lock for installation.

For this step, you will need to drill out the hole for the lock cylinder (provided with the lock) and insert it into the door. You will then need to take a drill bit that matches your door thickness and drill out a hole in the door’s deadbolt strike plate. Then, you can insert your deadbolt into this plate and tighten it down until it is snug.

The last thing you will need to do is install your new Schlage Smart Lock on top of these two items by using either screws or adhesive tape.

Step 5: Connect To The Schlage App And Register Your Device To Use

Registering your device with Schlage is a simple process. First, connect to the app from your home page and input your email address.

Then, confirm the email address by clicking the link sent to you through email. After confirming your email address, click “Yes” to authorize access on your device for Schlage. You can then control Schlage’s functions remotely on the mobile app.


How to install a Schlage Touchscreen Smart Lock in three simple steps. First, use the removal key to remove the old lock’s exterior part, which will expose the deadbolt assembly. Next, insert the included spacer on top of the deadbolt assembly. Finally, insert your new Schlage smart lock and turn it to lock in place.”

1 thought on “How To Install Schlage Smart Lock”

  1. Pingback: Schlage vs Kwikset Smart Locks: best for your needs(2022) - Get Things for Home

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top